Repareer je spullen Gemeenschap Winkel

Riparazione Yellow Light of Death

Terug naar de handleiding
Engels
Italiaans
Stap 8
Yellow Light of Death Repair: stap 0, afbeelding 1 van 3 Yellow Light of Death Repair: stap 0, afbeelding 2 van 3 Yellow Light of Death Repair: stap 0, afbeelding 3 van 3

  • Apply the fresh thermal pads to the motherboard in the locations indicated:

  • Large square pads

  • Small square pads

  • Small Rectangular Pads

  • If you'd like to cut your own thermal pads, you'll need material about 2-2.5mm in thickness. Thanks to user howardsarah34 for the exact measurements for the thermal pads.

  • Two 3cm x 3cm Squares

  • Ten 1cm x 1cm Squares

  • Five 1.5cm x 0.5cm rectangles

Applica i nuovi pad termici alla scheda madre nei punti indicati:

Pad quadrati grandi

Pad quadrati piccoli

Pad rettangolari piccoli

Se vuoi ritagliarti da solo i tuoi pad termici, ti serve del materiale spesso 2-2,5 mm. Ringraziamo l'utente howardsarah34 per la misurazione esatta dei cuscinetti termici.

Due quadrati 3 x 3 cm

Due quadrati 1 x 1 cm

Cinque rettangoli 1,5 x 0.5 mm

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.

OSZAR »