Ga door naar hoofdinhoud

Yellow Light of Death Repair

Engels
Nederlands
Stap 5
Yellow Light of Death Repair: stap 0, afbeelding 1 van 2 Yellow Light of Death Repair: stap 0, afbeelding 2 van 2
  • Using a circular motion, evenly heat (using low heat) the two processors labeled "RSX" and "CELL" for 2 minutes while keeping the gun about 1/2" above the chip. For the Lower two areas heat for 30 seconds following the same distance guidelines from above.

  • Begin heating the GPU, marked "RSX", and heat the chips in a zig-zag order.

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.

OSZAR »