Ga door naar hoofdinhoud

Steam Deck Loskoppelen van de batterij

Waarschuwing: Je bewerkt nu een vooraf vereiste handleiding van de handleiding die je net bekeek. Alle wijzigingen die je hierin maakt, beïnvloeden alle 33 handleidingen die deze stap bevatten.

Stap 1 vertalen

Engels
Nederlands
Stap 1
Steam Deck Battery Disconnection, Uncover the hidden shield screw: stap 0, afbeelding 1 van 2 Steam Deck Battery Disconnection, Uncover the hidden shield screw: stap 0, afbeelding 2 van 2
Uncover the hidden shield screw
  • If you have a refreshed Steam Deck version with the black motherboard cover, skip this step.

  • Use a pair of tweezers to remove the piece of foil tape covering the hidden screw on the board shield.

  • If possible, try not to rip or tear this tape so it can be reused. If necessary, you can fashion a replacement by cutting a piece of aluminum foil tape to fit.

Gebruik een pincet om het stukje tape dat over de verborgen schroef op het schild van de printplaat is geplaatst.

Probeer het stukje tape, indien mogelijk, niet te scheuren, zodat je het weer kunt hergebruiken. Indien nodig kun je een stukje aluminium-tape gebruiken ter vervanging van het originele stukje tape.

[title] Uncover the hidden shield screw
-[* black] Use a pair of tweezers to remove the piece of foil tape covering the hidden screw on the board shield.
+[* icon_note] If you have a [link|https://guide-images.cdn.ifixit.com/igi/l2ABGc6CMQFIytZB.full|refreshed Steam Deck version|new_window=true] with the black motherboard cover, skip this step.
+[* black] Use a pair of [product|IF145-020|tweezers] to remove the piece of foil tape covering the hidden screw on the board shield.
[* icon_note] If possible, try not to rip or tear this tape so it can be reused. If necessary, you can fashion a replacement by cutting a piece of aluminum foil tape to fit.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.

OSZAR »